Designer Block Three Quarter Length 12.702
National Masonry™ has the leading range of Architectural decorative masonry blocks available, including the Designer Block Three Quarter Length 12.702. Architectural Designer Range Blocks, such as the Designer Block Three Quarter Length 12.702, are available in a range of contemporary colours and finishes, such as Smooth Face, Shot-Blast, Honed, Polished and Split Face. National Masonry’s range of Architectural Decorative Blocks, including the Designer Block Three Quarter Length 12.702, will give your next project the winning edge. Available for pick up or delivery.
Designer Block Three Quarter Length 12.702
The National Masonry™ Architectural Designer Range includes the Designer Block Three Quarter Length 12.702.
The Architectural Designer Block Three Quarter Length 12.702 is available in a range of innovative colours and finishes for pickup or delivery to Brisbane, Gold Coast, Northern NSW, Sunshine Coast, Ipswich, Logan, Toowoomba and Greater South Queensland.
Check out our Facebook page for styling ideas, tips and how-to guides, for the Designer Block Three Quarter Length 12.702.
Architectural Designer Block Three Quarter Length 12.702 Finish Guide
National Masonry’s Architectural Designer Range has the leading range of decorative masonry blocks available. Architectural Designer Block Three Quarter Length 12.702 is available in contemporary colours and finishes – please check for exact colour and finishes. National Masonry’s range of architectural decorative blocks will give your next project the winning edge.
Note – not all colours and finishes are available on all Architectural Designer Range blocks.
Smooth Face – A finely textured finish created through the standard moulding process. Both faces are suitable for face block work. Care is required when laying 2 face walls as variation in width of up to +/- 2mm may be present.
Value Added Finishes
Value added finished masonry is supplied as a single face product. When only one face is value added, the back side of the block may not be suitable as a face finish due to the value adding process. If both faces are value added, both faces will be suitable for a face work but care will be required when laying as there may be 2-5mm difference in the width of the individual blocks due to the honing / polishing process.
Shot-Blast Face – This process subtly exposes the aggregates, producing a weathered, sawn stone-like finish.
Honed Face – The honing process grinds 2-3mm from the block surface, producing a matt exposed-aggregate finish.
Polished Face – This involves producing a denser block which is honed and then buffed. Polishing enriches the colour of the aggregates. The finely finished polished surface is ideal for feature walls, trims and banding.
Split Face – The splitting process produces a bold textured, exposed aggregate finish.
Important Designer Range Information
Lead Time – Lead times apply to all Architectural Designer Block Three Quarter Length 12.702 blocks. Longer lead times apply to Architectural Designer Blocks which are Honed, Polished or Shot-Blast Finishes, as the product must be cured to harden sufficiently before processing.
Colour and Texture Variation – Some variation in colour may occur due to natural variations in raw materials. Colour variation can also occur from batch to batch making it essential to order all product requirements at the same time. National Masonry™ recommends part size blocks are cut on site to maintain colour consistency. Architectural Designer Blocks can be cut to order.
Blending – To obtain a consistent finish and mitigate colour variation, National Masonry™ strongly recommends “blending” which is drawing product from multiple pallets on-site.
Block Storage – Architectural Designer Block Three Quarter Length 12.702 blocks must be kept dry on site before use and when laid. Freshly laid walls must be covered overnight and when rain interrupts work in order to prevent moisture entering the cores of the blocks. Failing to do this will increase the likelihood of efflorescence.
Mortar – Architectural Designer Block Three Quarter Length 12.702 blocks contain an efflorescence inhibitor (Tech-Dry™). To complete the system, an additive must be used in mortar mix. National Masonry supply and recommend TECH-DRYAD Mortar Additive. The consumption of additive varies significantly, 20 litres of mortar additive may lay approximately 1000-1500 Tech Dry Blocks.
Sealing – All Architectural Designer Block Three Quarter Length 12.702 blocks should be cleaned and sealed with a quality penetrating sealer after installation. Failure to do so dramatically increases the likelihood and severity of efflorescence and general staining.
Designer Block Three Quarter Length 12.702 is available for pickup or delivery Brisbane, Gold Coast, Sunshine Coast, Ipswich, Logan, Toowoomba and South Queensland
Contact us now for details
|Dimensions||290 x 190 x 110 mm|
Alabaster, Pearl Grey, Platinum, Charcoal, Wilderness, Terrain, Coco, Paperbark, Almond
Standard Smooth Face, Shot-blast Face, Honed Face, Polished Face
|Average Weight Per Unit||
|Units Per Pallet||