Designer Block Full Length Quarter Height Split Face 10.117

Concrete_Block_National_Masonry_Melbourne_10_117

Designer Block Full Length Quarter Height Split Face 10.117

Clear selection

National Masonry™ has the leading range of Architectural decorative masonry blocks available, including the Designer Block Full Length Quarter Height Split Face 10.117. Architectural Designer Range Blocks, such as the Designer Block Full Length Quarter Height Split Face 10.117, are available in a range of contemporary colours and finishes, such as Smooth Face, Shot-Blast, Honed, Polished and Split Face. National Masonry’s range of Architectural Decorative Blocks, including the Designer Block Full Length Quarter Height Split Face 10.117, will give your next project the winning edge. Available for pick up or delivery.

Buy from your nearest Reseller


Product Description

Designer Block Full Length Quarter Height Split Face 10.117

The National Masonry™ Melbourne Architectural Designer Range includes the Designer Block Full Length Quarter Height Split Face 10.117.

The Designer Block Full Length Quarter Height Split Face 10.117 is available in a range of innovative colours and finishes for pickup or delivery to Melbourne, Geelong, Mornington Peninsula, and Dandenong.

Check out our Facebook page for styling ideas, tips and how-to guides, for the Designer Block Full Length Quarter Height Split Face 10.117.

Architectural Designer Block Full Length Quarter Height Split Face 10.117 Finish Guide

National Masonry’s Melbourne Architectural Designer Range has the leading range of decorative masonry blocks available. All National Masonry’s Melbourne Architectural Designer Range are made water resistant using a special recipe. Architectural Designer Block Full Length Quarter Height Split Face 10.117 is available in contemporary colours and finishes – please check for exact colour and finishes. National Masonry’s range of architectural decorative blocks will give your next project the winning edge.

Innovative Textures

Note – not all colours and finishes are available on all Architectural Designer Range blocks.

Smooth Face – A finely textured finish created through the standard moulding process. Both faces are suitable for face block work. Care is required when laying 2 face walls as variation in width of up to +/- 2mm may be present.

Value Added Finishes

Value added finished masonry is supplied as a single face product. When only one face is value added, the back side of the block may not be suitable as a face finish due to the value adding process. If both faces are value added, both faces will be suitable for a face work but care will be required when laying as there may be 2-5mm difference in the width of the individual blocks due to the honing / polishing process.

Honed Face – The honing process grinds 2-3mm from the block surface, producing a matt exposed-aggregate finish.

Polished Face – This involves producing a denser block which is honed and then buffed. Polishing enriches the colour of the aggregates. The finely finished polished surface is ideal for feature walls, trims
and banding.

Split Face – The splitting process produces a random, bold textured, exposed aggregate finish.

Important Designer Range Information

Lead Time – Lead times apply to all Architectural Designer Block Full Length Quarter Height Split Face 10.117 blocks. Longer lead times apply to Architectural Designer Blocks which are Honed or Polished Finishes, as the product must be cured to harden sufficiently before processing.

Colour and Texture Variation – Some variation in colour may occur due to natural variations in raw materials. Colour variation can also occur from batch to batch making it essential to order all product requirements at the same time. National Masonry™ recommends part size blocks are cut on site to maintain colour consistency. Some Architectural Designer Blocks can be cut to order.

Blending – To obtain a consistent finish and mitigate colour variation, National Masonry™ strongly recommends “blending” which is drawing product from multiple pallets on-site.

Block Storage – Architectural Designer Block Full Length Quarter Height Split Face 10.117 blocks must be kept dry on site before use and when laid. Freshly laid walls must be covered overnight and when rain interrupts work in order to prevent moisture entering the cores of the blocks. Failing to do this will increase the likelihood of efflorescence.

Mortar – Melbourne Architectural Designer Block Full Length Quarter Height Split Face 10.117 blocks are made water resistant using a special recipe. To complete the system, a mortar additive can be used in mortar mix. National Masonry supply Mortar Additive by Tech-Dry™. The consumption of additive varies significantly, 20 litres of mortar additive may lay approximately 1000-1500 blocks.

Designer Block Full Length Quarter Height Split Face 10.117 is available for pickup or delivery Melbourne, Geelong, Mornington Peninsula, and Dandenong

Contact us now for details

Melbourne (Riding Boundary Road, via Christies Road, Deer Park) – Call (03) 9361 6400

Additional Information

Weight 3.5 kg
Dimensions 390 x 95 x 40 mm
Available Colours

Alabaster, Sandune, Almond, Charcoal, Pearl Grey, Sandstone Blend

Available Finishes

Split Face

Average Weight Per Unit

3.5kg

Units Per Pallet

432