Designer Block Full Length Split Face 10.101

Concrete_Block_National_Masonry_Melbourne_10_101

Designer Block Full Length Split Face 10.101

Clear selection

National Masonry™ has the leading range of Architectural decorative masonry blocks available, including the Designer Block Full Length Split Face 10.101. Architectural Designer Range Blocks, such as the Designer Block Full Length Split Face 10.101, are available in a range of contemporary colours.

National Masonry’s range of Architectural Decorative Blocks, including the Designer Block Full Length Split Face 10.101, will give your next project the winning edge.

Buy from your nearest Reseller


Product Description

Designer Block Full Length Split Face 10.101

The National Masonry™ Melbourne Architectural Designer Range includes the Designer Block Full Length Split Face 10.101.

The Designer Block Full Length Split Face 10.101 is available in a range of innovative colours.

Check out our Facebook page for styling ideas, tips and how-to guides, for the Designer Block Full Length Split Face 10.101.

Architectural Designer Block Full Length Split Face 10.101 Finish Guide

National Masonry’s Melbourne Architectural Designer Range has the leading range of decorative masonry blocks available. All National Masonry’s Melbourne Architectural Designer Range are made water resistant using a special recipe.

National Masonry’s range of architectural decorative blocks will give your next project the winning edge.

Innovative Textures

Split Face – The splitting process produces a random, bold textured, exposed aggregate finish.

Important Designer Range Information

Lead Time – Lead times apply to all Architectural Designer Block Full Length Split Face 10.101 blocks as the product must be cured to harden sufficiently before processing.

Colour and Texture Variation – Some variation in colour may occur due to natural variations in raw materials. Colour variation can also occur from batch to batch making it essential to order all product requirements at the same time. National Masonry™ recommends part size blocks are cut on site to maintain colour consistency. Some Architectural Designer Blocks can be cut to order.

Blending – To obtain a consistent finish and mitigate colour variation, National Masonry™ strongly recommends “blending” which is drawing product from multiple pallets on-site.

Block Storage – Architectural Designer Block Full Length Split Face 10.101 blocks must be kept dry on site before use and when laid. Freshly laid walls must be covered overnight and when rain interrupts work in order to prevent moisture entering the cores of the blocks. Failing to do this will increase the likelihood of efflorescence.

Mortar – Melbourne Architectural Designer Block Full Length Split Face 10.101 blocks are made water resistant using a special recipe. To complete the system, a mortar additive can be used in mortar mix. National Masonry supply Mortar Additive by Tech-Dry™. The consumption of additive varies significantly, 20 litres of mortar additive may lay approximately 1000-1500 blocks.

Designer Block Full Length Split Face 10.101 is available for pickup or delivery Melbourne, Geelong, Mornington Peninsula, and Dandenong

Contact us now for details

Melbourne (Riding Boundary Road, via Christies Road, Deer Park) – Call (03) 9361 6400

Additional Information

Weight 14 kg
Dimensions 390 x 95 x 190 mm
Available Colours

Alabaster, Sandune, Almond, Charcoal, Pearl Grey, Sandstone Blend

Available Finishes

Split Face

Average Weight Per Unit

14kg

Units Per Pallet

108